Feature

●Wide DC power supply voltage from 6 V to 30 V, supports micro USB 5.0 V power supply, very convenient to use
●The module supports reverse input protection, and there is a stop button for emergency stop function
●Sleep mode added, it automatically turns off the display when in 5 minutes after activation no operation, and you can press any button to wake it up
●You can set different OP, CL, LOP parameters, these parameters were independent of each other and each stored
●All set parameters are automatically saved when there is a power failure


Description

Features:

The interface is clear, simple and powerful, easy to understand, meet almost all your needs.

With the optical coupling isolation, improved anti-interference ability, industrial standboard.

Specifications:

Voltage: 6 V ~ 30 V (support micro USB 5.0 V).

Trigger signal source: high voltage level trigger (3.0V ~ 24V), signal device and system terrain are not connected to improve the anti-interference ability of anti-interference (or you can connect them).

Load capacity: DC 30 V 5 A, AC 220 V 5 A.

Standby current: 20 mA.

Operating current: 50 mA.

Operating temperature: -40 □ ~ 85 □.

Size: 6.2 x 3.8 x 1.7 cm / 2.44 x 1.49 x 0.67 inches.

Time range: 0.1 seconds to 999 minutes (constantly adjustable)

Instructions:

Operating mode:

P1: After the trigger signal, the switch is

Connected for "op" time, then disconnected; within the "OP" time:

P1.1: If there is a trigger signal again, it is

invalid.

P1.2: If trigger signal starts again, start the timing again.

P1.3: When a trigger signal is displayed again, the switch will be disconnected, stop the timing.

P-2: After triggering.

Signal, switch is disconnected for "CL" time, then the switch is connected for "OP" time