Features:
The product is intended for gas nailers in the field of wood fixing technology. It is an efficient gas lubricated with 100% synthetic oil that ensures smooth operation of equipment. The high-purity gas ensures that no deposits occur in the magazine. The high performance parameters make the setting process more efficient. No downtime from charging. High-pressure devices that are supplied with gas are intended for moving round head or D-head nails collated with wire, plastic or paper tape, which are packed on a spool or flat ribbon. Length from 40 to 105 mm; tilt from 0º to 16-21º or 34º depending on the device. For attaching carpenters fittings, sheet metal and perforated tape to wood, for mounting roof and ridge areas, roof chairs, wooden slats, boards and other seating work; for assembling formwork, building boxes and wooden packaging. For fixing floorboards, OSB panels and mounting wooden fences as well as other gardening and forest work.
Technical data:
Cartridge - 165 mm x diameter 32.
Gas quantity - 80 ml.
Gas weight: 40 g.
Performance - 1100 shots
Packaging weight: 0.095 kg.
Lubricating - 100% synthetic oil.
Mixture - Propane-butane.
UN Number - UN1950
Air temperature when assembled – from -5°C to +35°C.
Storage capacity - 12 months from date of manufacture.
STORAGE AND TRANSPORT
Protect the product from direct sunlight, keep away from heat sources and open flames. Transport and store in originally sealed packaging in dry conditions at room temperature of over +5°C.
Comments:
Work according to technical safety data sheet, the instructions for use, standards and relevant occupational safety regulations. Technical data and information on the application apply to the temperature 25°C ± 2°C and for the relative humidity of 55-60%. Under other conditions, the information may vary. Keep away from children. In case of contact with eyes, rinse immediately with water and consult a doctor. The producer is not liable for damage as a result of application errors. Waste Key No. : 16 05 04* Gases containing hazardous substances in pressure vessels Waste key no. : 15 01 01 paper and cardboard packaging. Waste Key No. : 15 01 10* Packaging containing residues of hazardous substances or contaminated by dangerous substances. If you have any questions, please consult the manufacturer.
GENERAL RECOMMENDATIONS
The manufacturer is not liable for improper or improper product use or product use in any terms other than stated here. The **applies only to product quality. The professional and thus successful product use is not checked by us. Neither manufacturer nor authorized representative can accept liability for damage resulting from improper product use or storage. Company personnel may only submit the technical information contained in this technical leaflet. Product information that goes beyond the information mentioned here requires written confirmation. If you have any questions, please consult the manufacturer. With the publication of this technical leaflet, all previous editions lose their validity. This technical leaflet applies. All previous information sheets are replaced by this.