Feature
●The mains coupled inverter adopts waterproof and streamlined IP65 design, which can effectively prevent rainwater from eroding the surface. Please do not install it outdoors to avoid rain. It can be installed in a ventilated, dry and cool place.
●Robust Maximum Power Point Tracking (MPPT) and automatic locking of the Maximum Power Point (APL). Note: Some customers report that the solar panels are connected. There is no light. This is because the customer has extended the connection cable of the solar panel. (Positive and negative are opposite). With WiFi communication for remote monitoring via mobile phone grid tie inverter.
●Due to the special properties of solar panels, more energy can be obtained through a wider range of voltage structures. DC30-60V input, many customers think it can use DC30V/60V. This is a misunderstanding!Recommended with solar panels: 2 x 300W, Voc: 36-50V.
●Voc (solar panel) must be in the range of 36 to 50V to ensure good power efficiency.
●Stackable Insulation island protection, voltage protection, frequency protection, temperature protection, power protection. After much feedback from customer data, the inverter may not work due to damaged DC or AC fuses. If such a problem occurs, we can send you accessories for free. And offer you maintenance video instructions. You can easily replace.
Description
The second generation SG micro inverter adds the mobile phone communication function, so you can monitor the operating status of the inverter anytime and anywhere. This chip improves the safety of the power supply; maximises solar energy; improves system reliability and simplify installation, maintenance and management of the solar system.
Features:
1. Green energy reduces electricity costs
2. Single-phase output, flexible three-phase photovoltaic system
3. Wi-Fi Cloud Monitoring
4. Multiple units collect to form a large solar system
5. The maximum output power can reach 590 W; suitable for 60 and 72 cell PV modules
6. The maximum absorbed power of each branch is 300 W
7. Built-in AC bus cable, ready to use
8. Low cost power inverter, convenient installation and low cost
1. Install the microinverter correctly to ensure its normal operation and power generation.
2. Use a smartphone or tablet to scan the correct QR code (you can also search "Smart Life" via "Android App Store" or "Apple App Store"). Download the Smart Living application and install it correctly.
3. Activate the Bluetooth function of the smart device. 4 UK
4. Make sure your wireless network devices (e.g. WLAN router) work properly and connected to the Internet. 5
5. Connect the smart device (with the installed application "Smart Life") to the wireless network device via the installation position of the microinverter and check if it can access the internet correctly. If you can access the internet correctly, please read the configuration and use steps and start the configuration and use on the next page.
About inverter heater:
This is normal. All electronic devices generate heat during operation. The inverter is made of aluminium alloy. Metals conduct heat better. At high temperature, the inverter also has overheating protection. Then the inverter automatically reduces the working efficiency of the output. Or stop working. Restart after cooling. It is recommended to install the device in a ventilated, dry and cool place.
Inverter maintenance information: (This is a common problem of micro inverters)
After a large amount of customer data has been returned, the inverter cannot work as the DC or AC fuse is damaged. If you encounter this problem, we can send you an attachment. And provide you with a video of replacement instructions. You can easily replace it.
