Centrifugal Pump HMC 6 SC 1350 watt up to 6.5 bar maximum working pressure (equivalent to a head of 65 metres) multistage centrifugal pump with 6 wheels made from stainless steel this centrifugal pump is designed for supply pressure and should be with 1 inch hose in the intake area, as this will as the performance this pump aquariums ecosystem. A Rückflussventiel is a strict requirement the water pressure this pump is not adjustable. No manual on/off switch · Motor power 1350 watt · Thermoschutzschaltung · Max flow height 65 metres · Max Working Pressure: 6.5 bar · Max 6000 litres per hour · Max suction height: 7.35 metres · Suitable for continuous use · Max Water Temperature 60 °C · Max Temperature of the surrounding environment in operating 40 °C · Connection cross-section Size: 1 Female Thread · Material Cast Iron/Stainless Steel Cover/Engine Cover made of aluminium · Stainless steel shaft AISI416 SS; 6 wheels made from stainless steel aisi304 SS · Connection cable: 1.6 m with EuroPlug – 230 V ~ 50 Hz, Power consumption up to 1320 1370 W (in operation; start power consumption up to 1550 W · Weight: Approximately 18 kg – Dimensions: 49 x 21 x 17 cm · Acoustic Noise Measurement: Up to 78 dB under full load (6.5 bar), with a fully charged flow 74- 76 BB Please keep in mind that the individual maximum values, such as, special suction height Height and amount of water in relation, and be achieved only when the other 2 features equals zero are locked up safe and sound.
This pump is not suitable for use on a ram fountain - not suitable for Gardena system, the pressure build-up of the pump is too large