Feature

●Pack of 10 bucket wheels in stainless steel with stainless steel shaft, max. Suction height: 8 m at 1 inch
●Max. Discharge head 110 metres = max. Pressure 11 bar, flow rate 6000 L/h, voltage: 230 V / 50 Hz, protection class: IP 44
●The pump must be fused with a slow fuse 16 A. !
●This pump is only suitable if there is a check valve or foot valve at the bottom (e.g. for a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. !
●Connection suction and pressure side: 1 inch internal thread cable length: 30 cm with plug
●Pump dimensions: L x W x H 63 x 18 x 19 cm. The pump has 4 mounts at the bottom for mounting e.g. on a pressure vessel. !
●Very smooth running 68 db, high pressure build up with large flow rate characterise our pumps. A centrifugal pump does not suck itself. !
●The cable or consumer on the pressure side should have at least 1 inch. ! Important! !! Garden irrigation with 3/4 or 1/2 inch hoses > > max. 4 sprinklers can be connected. !


Description

The pump should be placed near the fountain hole to ensure the max. suction height. Equip the intake line with a check valve to ensure that the water column is maintained. If the check valve is installed in front of the pump and not as a foot valve, then you must also form a water column under the check valve. The water column must be resistant, as the pump cannot suck air which is in a suction line. Please fill the pump and suction line with water before use, otherwise there is a risk of dry running. The suction line should have a diameter of 1 inch - 1 1/4 inch and not be smaller or larger. Otherwise, the pump cannot provide the appropriate power or pressure. ! !