Feature(may vary by option.)

●Compatible with Nikon: D850, D800, D810, D700, D200, D300, D500, D1, D2, D3, D4, D4s, D5, N90s, F5, F6, F100, F90, D90X. Fujifilm: S5 Pro, S3
●Timer Schedule Recording: 1. The timer functions can be set to 99 hours, 59 minutes and 59 seconds in increments: timer schedule delay, interval timer, long exposure timer (interval timer and long exposure timer can be used simultaneously) and interval repeat timer time; 2. The number of shots can be set between 1 and 99. 3. The repetition times can be set from 1 to 99.
●4 types of shutter mode: TW-283 supports autofocus, single shot, continuous shooting, BULB recording, delay recording and timer recording. With the delay setting, you can set the delay time and number of recordings: the delay time changes from 1s to 59s, and the number of shots changes from 1 to 99.
●Anti-interference: It has no directivity, a distance of 80 m and an extremely powerful anti-interference ability. With 30 channels for options, interference from similar devices can be avoided. The transmitter and receiver adopt LCD screen, which is easier and easy to handle. With the FSK module and the global free frequency range of 2.4GHz, reliability and stability are improved.
●Tip: Some customers recently posted a negative review that the DC0 port of this shutter remote is not compatible with Nikon D810 or D850. We remind customers that the DC0 connector is compatible with Nikon D810 and D850. The DC0 connector is usually located on the front of the camera under the model brand D810 / D850 and is covered by a small cover.

[TW283 DC0 für Nikon]

[TW-283S2 for Sony]

Description

TW-283 is a kind of multi-function remote control for roller shutters.

Please read the user manual completely before using this timer remote control, and keep this manual for later use. Batteries - please use four new batteries. - Insert the batteries correctly into the battery compartment according to the and terminal of the batteries. Check in the operating instructions of your camera and connect the receiver to the correct remote socket of the camera. Make sure the cable is plugged in to the end to ensure good contact. This lock control may not trigger the camera if the connection cable is not plugged into the correct remote control socket or not at the end. Channel - transmitter and receiver must be set to the same channel. If you want to take less than 99 recordings, the repeat timer (REPEAT & N2) does not need to be set.

TW-283 DC0 compatible cameras: (This list of compatible cameras was updated on November 23, 2019).

For Nikon D40s D800E D810A D1X D2H D3X D1 D2 D3 D3s D4 D5 D4s D800 D810 D850 D700 D500 D300 D300s D200 N90s F5 F6 F100 F90 F90X Fujifilm S5 Pro S3 Pro Kodak DCS-14N

Specification:

System mode: Wireless control system FSK 2.4 GHzCommunication channel: 30 channelsTransmission distance: over 80mStandby time of transmitter: over 1000 hours. (with 2 pcs AAA batteries)Receiver standby time: over 400 hours (with 2 AAA batteries)Transmitter size: 146 x 40 x 19 mm. Receiver dimensions: 73 x 38 x 31 mm. Weight: Transmitter: 52.6 g (without batteries). Receiver: 36.2 g (without batteries).

Box contents:

TW-283 transmitter x 1TW-283 receiver x 1 blind connection cable x 1 user manual x 1 (batteries are not included).

Information on how to insert the batteries can be found in the battery compartments of the transmitter and the receiver under "+" / "-". The receiver flashes as a red LED light; if the light does not flash, the battery should reverse the direction.