Mahnoor Specifications:
600 mm thermocouple with M8 x 1 thread head.
Bakelite knob AD 38 mm, D shaft 6.1 mm
User manuals
1. Attach the valve with head screw and the flange of a plate or board of your grill or fire pit.
2. Connect your inlet and outlet hose to the inlet and outlet side. (Attach enough in case of gas leakage).
3. Attach the thermocouple nut M8 to the valve end (check before purchase whether valve end thread is 8 mm).
4. Connect the thermocouple and end thread well.
5. Open the correct size with the button and press the valve for about 5 10 seconds, thermocouple head is sufficiently heated.
6. Leave your hand and it works properly. If you close the gas valve again when releasing your hand, please check this
When thermocouple is always heated
When the thermocouple end is well connected to the valve
If the inlet and outlet side is well connected to the
Colour: yellow.
Material: copper.
Package contents:
1 x gas control valve.
Only the above package content, other products are not included.
Note: Due to lighting and screen settings, the colour of the item may be slightly different from the pictures. Allowed measurement error is +/- 1-3 cm.