Wheel protection for Worx Landroid front wheel M500 M700 etc. Robotic lawnmower. FLEXIBLE
A wheel cover made of flexible material. This wheel cover is intended for wheels of the Worx Landroid with 80 mm diameter and 50 mm width. Advantages of the wheel cover is that it protects the front wheel, thanks to the rubber-like material is extremely noise-absorbing on concrete, etc. Furthermore, the material is extremely wear-resistant. On the TestWORX mower, this wheel guard has been used for 3 years now and it has minimal wear and tear. The wheel protector makes the front wheel only slightly larger in diameter, but this prevents the front wheel from getting caught in holes extremely. Among other things, thanks to the minimally larger wheel, the mowers snout also moves slightly upwards, which in turn reduces snagging
Suitable for Worx Landroids with 80 mm wheel diameter and 50 mm width:
Worx Landroid S300 (WR130E).
Worx Landroid M500 (WR141E).
Worx Landroid M500 Plus (WR165E).
Worx Landroid M700 (WR142E).
Worx Landroid M700 Plus (WR167E).
Worx Landroid M1000 (WR143E).
Worx Landroid L800 (WR148E) (2 pieces required!)
Worx Landroid L1000 (WR147E) (2 pieces required!)
Worx Landroid various L versions (please check wheel dimensions beforehand!)
✅ and many other models from Worx (please check wheel dimensions beforehand!)
The wheel cover is delivered in black.
Product information:
Material: TPU.
Box contents: 1 x wheel cover for 80 mm wheels (please note that two wheel covers are required for some models). With illustrated assembly instructions (English language not guaranteed).
These are not original parts but compatible accessories. The names and brand names mentioned are only used to identify the product. The scope of the item is mentioned in the description. Other visible items in the pictures are not included. Each part is individually made and comes from a 3D printer. Therefore, there may be minimal differences from the item shown. We assume no liability for defects during assembly, during the service life of the robot or during assembly/disassembly of the products.
The outer diameter of the front wheel may be reduced by long use of the Landroid (wear). Therefore, it may happen that the wheel rubber no longer has its necessary fit. Here a possible solution would be that you wet it with silicone before you put on the wheel. This means that the wheel rubber has its necessary adhesion again.