Attention:
Since there is no voltage indicator after adjusting the dip switches, it is recommended to measure the voltage with a multimeter before connecting to the application circuit.
If the dip switch is not set according to the table, the module outputs one of the above voltages.
Supported fast charging protocol: PD2.0/PD3.0, QC20/QC3.0, AFC
Supported voltages: 5V, 9V, 12V, 15V, 20V (does not support voltage levels)
Voltage adjustment mode: according to the table on the back of the board, adjust the dip switch to control the output voltage