Feature

●3. The frequency divider blocks the signals over the medium and low frequencies and leaves only the real bass content, which makes the human voice look very quiet and the bass stands out to compensate for the missing bass of the speaker.
●2. The material is sufficient, the inductor consists of a large oxygen-free copper inductor with 1.2 wire diameters, an imported DC-LINK high voltage capacitor with high voltage strength and a high-frequency ceramic high-performance circuit with heat dissipation resistance.
●1. The frequency divider of the subwoofer is the frequency divider of the pistol box. Its function is to divide the total frequency signal of the power amplifier, block the signal above the medium and low frequency, and let the bass, subwoofer and subwoofer through.
●4. The general frequency divider uses a 5mm inductor. In order to allow the low frequency signal to pass quickly, in this case, a 6 mm inductor and a 5 mm thick inductor are used in series, and the two inductors are far apart to reduce heat generation and dissipate heat quickly. The crossover is more stable in operation.


Description

Evzvwruak Product description:
Model: 92.
Filter: bass.
Power: 400 W.
Frequency response: 48 Hz.
Impedance: 4-8.
Applicable: bass, subwoofer modification and upgrade
Size: 160 x 95 mm.
Material: plastic.
Color: As picture show

Package contents:
1 x Bass Crossover

Only the above package content, other products are not included.
Note: Due to the light reflection and monitor settings, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.