Feature

●In this case, we remove the jumper cap from Jumper A to limit the extremely low and reduce distortion. When we remove the cap from Jumper B, it will increase while the cap of Jumper B is turned on and will be reduced. Jumpers C and D are used to control the height range. When the cap of Jumper C and D is put on, treble sound is the loudest.
●Jumper details: Jumper A, B are used to control the audio effect of the bass range. A for the lower limit and B for the upper limit of the audio range. On some speakers, speakers will show distortion when too turned up.
●If only cap is C, treble sound is lower. When cap D is put on, further down. When both caps are removed from C and D, no treble sound is heard. (Generally, the four jumpers would sooner or later find your sound effect. Anyway, all effects always depend on your actual test.)


Description

How to use the splitter board:
First connect the connection according to our above diagram (highs, low, input), connect to the speaker, close the air gap, and can listen to music while optimising.
Normally we use jumper A and leave B idle. For Jumper C and D: we need to hear the actual effect highs. A general formula is: A + D = better; A + C = clear treble and bass; A + CD = clear treble and bass ( overall effect tends to highs); + CD = medium frequency. If effect is unnecessary, we can remove cap A. Please optimise, opinion is, and then attach the board to your speaker unit.
Technical data:
Model: YLY-2088
Power: 400W or less
Resistance: 4-16 ohms.
Frequency: adjustable.
Color: As picture show
Material: ABS
Size: 7 x 5 x 2.5 cm.

Package contents:
2 x speaker frequency dividers.

Only the above package content, other products are not included.
Note: Due to lighting and screen settings, the colour tone in the photos and the actual product may be slightly different. Allowed measurement error is +/- 1-3 cm.