Feature(may vary by option.)
●Input voltage: DC 3.2 V to 46 V (the input voltage must be more than 1.5 V higher than the output voltage. Boost not possible.) Output: DC 1.25 V to 35 V voltage infinitely adjustable, maximum output current is 3 A
●Output voltage range: DC 1.25 V to 35 V voltage continuously adjustable, a high efficiency (maximum 92%) maximum output current is 3 A
●High-precision step-down converter: made of 36u thickened circuit boards, high-Q inductance with LED output display and superior solid-state capacitors semiconductor capacitors, these DC-DC modules can work with high effect
●Steps: Connect to the power source, adjust the twist button on the blue potentiometer and monitor the voltage with the multimeter to get the required voltage, increase the voltage clockwise and reduce the voltage counterclockwise. (The factory default setting is high voltage. You need to reverse about 7-8 circles before the voltage drops. 1 circle means +/- 1V.)
●External dimensions (L x W x H): 6 pieces, 45 x 20 x 14 mm, note: this is a buck module. The input and output interface cannot be reversed. The input voltage must be higher than the output voltage, step down converter voltage regulator step up converter DC converter V bucks buck converter voltage converter 24 V 12 V buck converter LM2596
[Pack of 12]
[Pack of 6]
Description
Gigavo LM2596 DC to DC Buck Converter, 3.0 - 40 V to 1.5 - 35 V Power Supply Step Down Module, Buck Converter Module, Down Converter, Adjustable Power Supply Buck Converter, Pack of 6, Pack of 12
Input voltage: DC 3.2 V to 46 V (the input voltage must be more than 1.5 V higher than the output voltage. Boost not possible.) Output: DC 1.25 V to 35 V voltage infinitely adjustable, maximum output current is 3 A.
Output voltage range: DC 1.25 V to 35 V voltage continuously adjustable, a high efficiency (maximum 92%) maximum output current is 3 A.
High-precision step-down converter: made of 36u thickened circuit boards, high-Q inductance with LED output display and superior solid-state capacitors semiconductor capacitors, these DC-DC modules can work with high effect
Steps: Connect to the power source, adjust the twist button on the blue potentiometer and monitor the voltage with the multimeter to get the required voltage.
clockwise increase the tension and reduce the tension counterclockwise. (The factory default setting is high voltage. You need to reverse about 7-8 circles before the voltage drops. 1 circle means +/- 1V.)
External dimensions (L x W x H): 6/12 pieces, 45 x 20 x 14 mm, note: this is a buck module. The input and output interface cannot be reversed. The input voltage must be higher than the output voltage