Feature

●【Parameters】: Input voltage range: the input voltage range of the DC motor driver is DC 6.5V-27V. It can input DC 12V or 24V. The rated output current of each port is 7A and the total output power is 160W.
●【Forward and reverse rotation】: The IN1, IN2/IN3, IN4 connectors can control the forward or reverse rotation of the motor.
●【PWM Speed Control】: Activate the PWM input of the signal port (ENA) to adjust the speed, PWM frequency range 0-10KHz.
●【Strong Drive】: The motor control board uses a double H bridge and can drive two DC motors at the same time.
●【Low Voltage Protection】The motor driver module is equipped with undervoltage protection to prevent a sudden large current from damaging the module.

Description

Product description:
Specification:
Name: Drive control board.
Weight: about 20 g.
Size: about 55 x 55 x 16mm/2.17*2.17*0.63in
Mounting hole diameter: about 3 mm/0.12 inches.

Features:
1. The power supply voltage is 6.5V-27V, and the power supply cannot exceed 27V, otherwise the module will be burned. It is recommended to connect a 15A fuse in series with the current input terminal.
2. Dual motor interfaces, each with a rated output current of 7A and a peak current of 50A. The motor interface cannot be short-circuited. It is recommended to connect a 15A fuse in series.
3. A motor with a rated voltage of 24V, a motor with a rated power of 115W or less, and a motor with a rated current of 7A can work for a long time.
4. The activation signal and the forward and reverse control signals control the voltage at 3-6.5V.
5. Enable signal terminal (ENA) input PWM to adjust the speed. The PWM frequency range is 0-10KHZ, and the minimum PWM pulse width is 10us.

Package includes:
1 x DC motor driver.
1 x 10-pin male and female DuPont cable