●This module is a pulse generation module that provides stepper driver as a signal, to control the stepper motor must also match the drive. ●The simple control + step driver + stepper motor, DC power can consist of a series of simple control platforms. ●The regulator has high 5.4k 540 - in - 160kHz, 16.6kHz, low to total 3 80-2.4kHz frequency signal can be used to jump needle selection. ●Can produce both pulse signal and PWM signal and select a selected jumper. ●Frequency measurement: can measure both PUL and Coyin (or Coyang) ports.
Description
Features:
1. This module is the pulse generation module, the stepper driver as a signal to control the pedal motor and must also match the drive. 2. The simple controller + stepper driver + stepper motor can consist of a range of simple control platforms. 3. The controller has a high 5.4K 540-160kHz, 16.6kHz, at a total of 3 80-2.4kHz frequency signal can be used to jump needle selection.4. Can generate pulse signal as well as PWM signal, choose Cand and a jumper. 5. Frequency measurement: Can measure both pulse and Coyin (or Coyang) ports.
Specification:
Condition: 100% Brand NewItem Type: Stepper Motor Drive ControllerMaterial: MetalColor: As shown in the pictures. Size: Approx. 38.6 x 58 mm
Package list
1 x Stepper Motor Drive Controller2 x Screw Seal
From the synchronisation motor driver port tag is different, but the same function
From the synchronisation motor driver port tag is different, but the same function:
En = ena = free activation. Pulse = CLK -PulsDir = CW = CWW direction
Yang connection (b):
En + pul + dir + has been received a total anode page together. MeetPul - Answer the CLKDir - Meet You
Yin connection (b):
EN - Pul - Dir - have been received a total cathode together. En + meet enPul + answer the clkDir + meet you