Feature
●[Technical Data] The controller has three types of frequency signals: high 5.4k to 160kHz, medium 540 to 16.6kHz, low 80 to 2.4kHz.
●[Easy to use] This simple control + step driver + stepper motor + DC power supply can form a simple control platform.
●[Use Tips] To control the stepper motor, a driver must be equipped.
●[High practicality] This module is a pulse generation module that provides a step driver as a signal, which is very convenient.
●[Good performance] Pulse signal and PWM signal can be generated, which can be selected by skipping. Frequency measurement: PUL and common cathode (or common anode) two ports can be measured.
Description
Different stepper motor drive connections have different names, but the same function:
Enable EN = ENA = FREE
PUL = PULS = CLK pulse
DIR = CW = CWW direction
Common anode connection (connection B)
EN + PUL + DIR + connected to the common anode
EN - connects to EN
PUL connects to CLK
You connects to you
|
|
|
|
|---|---|---|
Common cathode compound (connection B)EN-PUL-DIR - connected to the common cathode EN + connects to EN PUL + connects to CLK DIR + connects to you |
This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform. |
Size: Approx. 38.6 x 58 mmThe controller has 3 frequency signals with high 5.4k-160 kHz, medium 540-16.6 kHz and low 80-2.4 kHz, which can be selected by jumper. It can produce pulse letters and PWM signals that can be selected by jumper. Frequency measurement: Can measure PUL and common cathode (or common anode) at two ports |
