Feature

●Compatible with SATA 3.0 serial specification, backward compatible with SATA2.0 SATA1.0.Compatible with PCI-Express v2.0 and backward compatible with PCI-Express v1.0.Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
●Supports FIS based on port multiplier switch or command switching. Compatible with SATA6G, 3G and 1.5G hard drives. Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
●The SATA interface mode from PCIE to SATA3.0 is the AHCI mode. If you want to insert the system hard drive on our card, the system hard drive must be installed in AHCI mode when you install the system on the motherboard. Otherwise, the system cannot be started via our transfer card.
●If it is found that the SATA interface installation system of the system hard drive inserted into the motherboard is in AHCI mode, you can insert the hard drive directly into our card and then enter the motherboard BIOS to set the system hard drive as the first boot process.
●If the two above conditions are met and the hard drive interface of the motherboard is still not started or repeatedly restarted, this may be due to the conflict between the hard drive interface of the motherboard and our transmission card. The solution is to call the motherboard BIOS and set the hard drive interface option of the motherboard to disabled. Then save and restart to start the system.


Description

Specification:
Name: 6-Port SATA 3.0 Expansion Card
Model: PCE6SAT-M01
Main control: for Marvell 88SE92xx + 109X.
Interface: PCI-E 1x, 2x, 4x, 8x, 16x
Support system: for WINXP / WIN7 / WIN8 / WIN10 / LINUX
Bus interface: PCI-Express x1 slot
Expansion interface: 6 SATA3.0 interfaces
Product size: approx. 12 x 10 x 2 cm / 4.7 x 3.9 x 0.8 inches.

The general conditions and solutions for connecting hard drive and PCIE to SATA3.0:
1. When the system disk is inserted into the motherboard, the normal
When a hard drive is inserted into the PCIE to SATA 3.0 card, only the adapter card is used. Information and the normal hard drive model must be detected at startup.
2. If the condition is met or the system cannot be started,
You need to enter the motherboard BIOS and set the system disk to the first computer.

The system hard drive and ordinary hard drive and PCIE to SATA3.0 connection and solution:
1. Prerequisite, if the system hard drive is installed with the original motherboardSystem is AHCI mode test, can use the following methods to achieve when
If the system is installed in IDE mode, you can only reinstall the system via PCIE to SATA3.0.
2. If the first condition is met and you still cant start
To enter the motherboard BIOS, set the system hard drive to the first start.
3. If the first and second conditions are met and you still do not
can start, then there may be an integrated SATA interface conflict, please enter
oneThe motherboard BIOS to set SATA to disabled
Package list:
1 x card.
1 x half-height baffle.