Feature(may vary by option.)

●PCIe to USB expansion card: Provides 4 external ports for any desktop computer that supports PCIe x4 to x16 to connect additional USB devices to the computer system. In addition, the card internal 19 pin USB 3.0 header and USB type E DIY can be extended to the front panel of the computer.
●USB 3.1/3.2 Gen2 10Gbps:Based on the ASM3142 high-performance chipset, it allows you to quickly access your files with a data transfer rate of up to 10 Gbps. Transfer high definition movies, photos, music, etc. Note: The actual transmission speed may be limited by the connected device.
●Wide compatibility: operating system compatible with Windows XP/7/8/10/Mac OS 10.8.2 or above. Supports PCIe 3.0, PCIe 2.0 computer motherboards, suitable for PCI Express x4, x8 or x16 slots. The PCIe to USB-C card port is backward compatible with USB 3.1, USB 3.0 and USB 2.0 peripherals.
●Easy installation: it can be powered directly via the PCI-E port on the motherboard, plug and play. In addition, each port has a separate intelligent insurance component to protect your computer equipment.
●Package list: 1 x USB C PCIe card, 1 x low profile holder, 1 x CD drive, 2 x screws. Note: Windows Vista /XP/7 system must install the driver from the CD.

[Black]





Description

usb 3.1 cardusb 3.1 card

Product advantages:

1. Add 2 USB 3.1 Type C ports on the desktop computer through the PCIe slot. The data transfer speed of each USB-C port can reach up to 10Gbps bandwidth. In addition, the internal 19-pin USB 3.0 port of the PCIe expansion card and the USB Type-E port on the front of the computer can be expanded as needed.

2. The USB-C port can be powered via the PCI Express slot, so no additional power cables need to be connected from the power supply.

3. Each interface has an independent voltage stabilising capacitor to protect the computer from overcurrent and short circuit damage.

Specifications

Applicable interface: PCI-E X4 / X8 / X16
Expansion interface 2 x type C connector, 1 x type E port, 19 pin USB 3.0 header
Transfer Rate 10 Gbps
USB-C port performance 5 V, 3 A
Packing list 1 x USB C PCIE card, 2 x screws, 1 x holder, 1 x CD drive
Operating Systems Supports Windows XP/7/8/10, Mac OS X, Linux

Note:

1. Not compatible with the old PCI Express X1 slot.

2. This USB C PCie card only supports data transfer, not the transmission of video signals (DP, HDMI, VGA display conversion), please note this before selection.

3. The system requirements are Windows XP/7/8/10 operating system and Mac OS 10.8.2. (MSI/Dell Win 11 systems are not supported.)

4. Do not install this PCIe card when the computer is turned on.

5. The 19-pin connector inside the USB-C card can only be connected to two USB 3.0 A ports, and the Type E port can only be connected to one USB-C port. Besides, the rear ports do not support data cables with Thunderbolt protocol.

6. If the card does not work, first check if there is a problem with the PCI Express slot on the motherboard.