Introduction functions:
1. Memory function.
2. Speed tendency.
3. Used for two tyre specifications.
4. SPD current speed.
5, ODO odometer.
6. DST distance of single journey.
7, MXS maximum speed.
8, AVS average speed.
9, TM time of ride.
10, CLK (12H / 24H) / watch.
11, SW timer (second display).
12, CAL calorie content.
13. Fat measurement of fat burning.
14, TEM temperature.
15. Low power indicator.
16, backlight.
17. Maintenance reminder function.
18, adjustable for KM / h or M / h.
19, wheel circumference.
20, Auto Off
Easy installation instructions:
1. Install battery (sensor and bicycle speedometer).
2. Reset the odometer before first use to achieve the most accurate results.
3. Install the seat.
4. Mount sensor on the front wheel.
5. Mount the magnet on the spoke of the front wheel.
6. Install the odometer on the handlebars of your bike.
Notes:
◈ Press any button night light every day from 17:00 to 07:00 for 4 seconds, while pressing the left and right button, the night light continues to light, the other time does not light up.
The wireless bicycle computer and the sensor of the distance cannot exceed 60 cm.
The distance between magnet and sensor should be less than 1.5 mm.
Waterproof but avoid being exposed to rain and water as it can be absorbed by;
In case of water the device does not work very well, remove the battery and allow to dry, then try again.
to install and connect;
Package includes:
1 x bicycle speedometer.
2 x CR2032 batteries.
1 x holder.
1 x magnet.
2 x rubber disc.
1 x plastic strap.
1 x sensor.