Despite its compactness, the subwoofer is powerful thanks to the integrated amplifier that provides 120 watts RMS.
The DRIVE10UA can deliver a powerful yet balanced bass thanks to the 25 cm membrane, as it is not too big and not too small.
Thanks to the compact design of the DRIVE10UA, installation in almost any vehicle can be achieved. The necessary cables and fuses are already included in the box contents.
The Drive 10UA (Underseat Active) option conjures up just the right addition in the bass in the car with its 25 cm / 10 inch membrane to harmoniously round off the car sound even at lower frequencies.
The die-cast aluminium housing is extremely stable and resistant. Due to the hard housing, the bass pressure is very crisp and precise and allows a neat bass pressure despite the small housing.
The DRIVE10UA can be installed under the driver or passenger seat (depending on the design of the car). Of course, the subwoofer can also be installed behind the glove compartment, passenger footwell or in the boot, depending on the possibilities of the bodywork.
Rated power: | 175 W (2 x 82.5 watts). |
RMS power | 120 Watt RMS (2 x 60 Watt RMS). |
Impedance: | 4 Ohms. |
Cut-off frequenc | 50 - 100 Hz. |
Input sensitivity. | RCA input 50 mV - 0.2 V. |
High level input. | 0.8V - 10V |
Dimensions: | 369 x 275 x 82 mm. |
A recommendation is our underseat active woofer option DRIVE10UA, which is easy to install under many car seats with its dimensions of 369 x 275 x 82 mm. This active subwoofer comes complete with installation kit and also features high-level pull-out cables to retrieve the music signal either on the car stereo or speakers. The power supply is also included with the subwoofer package and can be easily connected with its 5 metres at the positive pole of the car battery and at a ground point.