Feature

●The best price for a 2mm aluminium butyl sound insulation on Amazon! Not only do you buy an excellent quality product, but also save more than 20% compared to the materials of Dynamat, Fatmat, Hushmat, Second Skin, etc. Benefit from our optimal and cost-effective solution for sound insulation and noise protection!
●Don’t miss the chance to get 50% more quality and efficiency for only 25% of the price. Now we offer the material that is 1.5 times stronger, which ensures 1.5 times more efficient vehicle insulation and dedroning. Noico 2mm offers 1.5 times better performance than similar sound insulation materials with a thickness of 1.3mm and is only 25% more expensive than these. The stronger the material is, the better properties it provides.
●Noico Self Adhesive Car Sound Mats are made from butyl and aluminium foil and have a weight of 3.7 kg / 1 m². This ensures the highest efficiency and sound insulation properties that a 2 mm thick material can only provide. Noico 2 mm is a full-fledged sound insulation material.
●Noico sound insulation mats have a special indicator that ensures correct mat installation. So the film has a special pattern which is used to show you whether the mat is properly attached. Roll the mat on the surface until the film becomes flat and smooth, so you no longer see its concave convex texture. This means you can be 100% sure that the material has been applied correctly and professionally.
●Specifications of the sound insulation mats: Thickness - 2mm Total Coverage - 0.95m2 Number of Individual Mats Per Pack - 10. Mat Dimensions - 38cm x 25cm. Pressure roller is not included.

Description

Noico 2 mm is a high-quality sound insulation material. The vibration dampening layer is a composition of butyl and various enhancers. These components are used in correct proportions to achieve maximum efficiency. The optimal weight of 2 mm material is at least 3.4 kg/1 m². The weight of the material can affect the physical properties and therefore increase or decrease the performance.

The material is designed for professional sound insulation of the car. It has a good hold. Noico 2mm virtually smells. It is easy to cut and install. Noico is a very user-friendly sound insulation solution.

This material eliminates vibrations, reduces general noise, road noise and rattling of the vehicle for added comfort. This material also insulates the interior of the car from excessive heat (or cold). Noico 2mm also improves the quality of your sound system.

We recommend using Noico 2mm in combination with a closed cell foam layer suitable for additional acoustic and thermal insulation.

- Carefully roll the material onto the surface that was previously cleaned and degreased.

- The special embossing on the film makes installation easier, so you can see the areas that are properly rolled and those who need more pressure.

Correct installation of material is 50% of the successful sound insulation of your car.

FITS ON!

Please use gloves to protect your hands when working with material.

Bonnet boot doors car floor wheel boxes vehicle noise and vibrations.

Installation

Please read this service guide carefully until the end. It is important to familiarise yourself with all the details as the efficiency of sound insulation depends not only on the material used, but above all on the correct installation. Please note that incorrect installation may result in unwanted results or even no effect.

The 1st Steps.

Decide which part of the car you want to start: Floor, roof, doors, trunk or engine divider The treatment of each metal part of the car has its unique contribution to the overall effect. Before this background, we recommend that all metal parts are insulated as much as possible. Next, look in the operating instructions for the section that explains how to disassemble the trim parts. This information can also be found in relevant automotive forums. When disassembly, you need to be careful so that the mounting clips do not break.

The 2nd Steps.

If the factory insulation is damaged or not properly attached, then remove the residues of the insulation materials. If the condition of the factory insulation is still good, then you can leave it there.

The next step is thorough cleaning, drying and degreasing of the working surface. The silencer does not adhere properly and can not last long when applied to wet or dirty surfaces. For this purpose, use a degreaser* and a dry, clean cloth. We also recommend wearing gloves while working and ventilating the room from time to time. * Try the degreaser on a small part before using on plastic or painted parts.

The 3rd Steps.

Once the second step is complete, measure the expected surface you will be treating. First, create a pattern in matching size from paper and then transfer it to an insulating mat. This will help to accurately place material and use it rationally. Use a knife or scissors to cut a desired shape and size. Be careful and use gloves to protect your hands.

The 4th Steps.

Next, place an insulation mat on the surface without removing protective paper. Make sure the surface is properly covered. Now its time to remove protective paper, but dont pull everything at once but step by step for better adhesion. Once the insulation material is on a surface, press it and let it stick. Smooth the leaf with your hands and then use a squeeze roller to avoid air bubbles between the mat and the metal surface. Special foil embossing on the mat allows you to see the areas that require more pressure. You will need to roll until the foil texture becomes smooth, which means the installation is correct.

Noico solutions installation operating temperature indicator adhesion.

Product information