Auprotec Vehicle Cable 6.0 mm² Fly-B Car Cable

Single-core cables for cars, wiring, lighting, signal systems and electrical accessories, manufactured to the highest and most modern quality standards

Auprotec vehicle cables – with asymmetrical conductor structure for space-saving installation

Strands made of bare soft annealed copper ECu according to EN 60228, with a purity degree of 99.99%

For cable construction, single wires with a diameter of max. 0.245 mm are used. This makes the cables highly flexible and resistant to cable breakage.

Auprotec vehicle cables, quality cable made in Germany

Our cables with reduced wall thickness of the thermoplastic plastic jacket with a shore hardness of Sh90 are considered the most modern vehicle lines in the automotive and vehicle industry.

Auprotec vehicle cables – many different cross sections and colours

All Auprotec car cables have blank, soft annealed copper wires and a non-fading insulating cover made of PVC. They are silicone, cadmium and lead free and manufactured according to German industry standards and the highest and most modern quality standards.

FLRY-B Vehicle Cable 4.0 mm² Cable Sets


Set of 2 Red, black	Set of 5 Red, black, yellow Brown, Blue	Set of 8 optionally Black, green, red Brown, yellow, green yellow, Blue, red, white

Car cable with reduced wall thickness

Thinner PVC insulation than conventional cables with consistent quality. High-quality workmanship. Intense and colourful insulation of the cables.

Cable cross section	6.0 mm²
Outer Diameter	Approx. 4.10 mm
Single wire diameter	Approx. 0.349 mm
Nominal voltage:	U~=50V U-=60V
Temperature range	Class A -40°C to +85°C
Material:	Bare soft annealed copper ECu
insulation	Polyvinyl chloride (PVC) DIN 72551 / ISO 6722
Construction / classification	Fine-stranded conductors, class 5 according to EN 60228
Conductor resistance at 20 °C	13.30 Ω/km
Country of manufacture:	Germany


	Vehicle cable 1.50 mm²	Vehicle cable 2.50 mm²	Vehicle cable 4.0 mm²	Vehicle cable 6.0 mm²
Cable cross section	1.50 mm²	2.50 mm²	4.0 mm²	6.0 mm²
Outer diameter, incl. Jacket:	Approx. 2.20 mm	Approx. 2.80 mm	Approx. 3.25 mm	Approx. 4.10 mm
insulation	Polyvinyl chloride (PVC), colour coded according to DIN 72551	Polyvinyl chloride (PVC), colour coded according to DIN 72551	Polyvinyl chloride (PVC), colour coded according to DIN 72551	Polyvinyl chloride (PVC), colour coded according to DIN 72551
Material:	Bare soft annealed copper ECu	Bare soft annealed copper ECu	Bare soft annealed copper ECu	Bare soft annealed copper ECu
99.99% purity	✓	✓	✓	✓
Reduced wall thickness	✓	✓	✓	✓
EN 60228 - quality product made in Germany	✓	✓	✓	✓
Selection set 2 colours of 5 / 10 metres	✓	✓	✓	✓
Selection set 5 colours of 5 / 10 metres	✓	✓	✓	✓
Selection set 9 colours of 5 / 10 metres				✓