Feature

●ISO radio adapter cable with switch on off
●ISO female to ISO plug, speaker and power
●For radio operation in motorhome or other vehicles with ISO connection. The radio can be switched on without ignition. Additional consumers will not be activated.
●ISO coupling (F) to ISO plug (M)
●Allows radio operation without ignition


Description

Radio adapter cable ISO ISO with on/off switch, ISO coupling (F) to ISO plug (M)

For radio operation in motorhome or other vehicles with ISO connection. The radio can be switched on without ignition. Additional consumers will not be activated.

Connection: Depending on the connection, the connected radio draws power from the car battery or from the body battery.

Configuration of the ISO connector:
Pin 1: Not occupied
Pin 2: Not occupied
Pin 3: Not occupied
Pin 4: continuous plus (cl. 30)
Pin 5: Electric Antenna/Remote
Pin 6: Lighting
Pin 7: Ignition plus (cl. 15)
Pin 8: Ground (Kl. 31)

The speaker cables are 1:1 connected.

Required installation opening for the switch: 20 mm.

Cable length: red/yellow 750 mm / 75 cm without the switch.

If your radio does not save the transmitters or the settings after switching off the ignition, you can turn ignition and continuous voltage. To do this, plug from terminal 15/pin 4 (ignition plus +12V) and terminal 30/pin 7 (continuous plus +12V) i.e. the two plugs (yellow to red / red to yellow).