[5m metre 1.00 mm² (AWG 18) copper wire Purple & Black]
[5m metre 1.00 mm² (AWG 18) copper wire brown]
[5m metre 1.00 mm² (AWG 18) copper wire blue & red]
[5m metre 1.50 mm² (AWG 16) copper wire yellow]
[10m metre 0.75 mm² (AWG 19 & 20) copper wire red & white]
[10m metre 1.00 mm² (AWG 18) copper wire green & red]
[5m metre 0.75 mm² (AWG 19 & 20) copper wire yellow & blue]
[10m metre 1.50 mm² (AWG 16) copper wire grey & red]
[10m metre 1.50 mm² (AWG 16) copper wire Green]
[5m metre 0.75 mm² (AWG 19 & 20) copper wire grey & black]
[10m metre 1.50 mm² (AWG 16) copper wire gray]
[5m metre 1.50 mm² (AWG 16) copper wire black & white]
[10m metre 1.50 mm² (AWG 16) copper wire red & blue]
[10m metre 0.75 mm² (AWG 19 & 20) copper wire red & grey]
[10m metre 1.50 mm² (AWG 16) copper wire blue]
[10m metre 1.00 mm² (AWG 18) copper wire Green & Yellow]
[10m metre 0.75 mm² (AWG 19 & 20) copper wire black & red]
[5m metre 0.75 mm² (AWG 19 & 20) copper wire red & yellow]
[10m metre 0.75 mm² (AWG 19 & 20) copper wire brown & white]
[10m metre 0.75 mm² (AWG 19 & 20) copper wire blue & green]
[10m metre 1.00 mm² (AWG 18) copper wire red]
[10m metre 1.00 mm² (AWG 18) copper wire blue & white]
[10m metre 1.50 mm² (AWG 16) copper wire black]
[10m metre 1.50 mm² (AWG 16) copper wire Purple]
[5m metre 1.00 mm² (AWG 18) copper wire blue & black]
AUPROTEC quality vehicle cables in OEM quality - Made in Germany. !
High-quality 0.75 mm² car cables type FLRy optionally 5 m or 10 m.
AUPROTEC vehicle cable with reduced wall thickness for space-saving installation, manufactured according to the currently highest and most modern quality standards.
ECu copper conductors with asymmetric construction and a purity of 99.99%, as well as a thermoplastic sheath with a Shore hardness of Sh90 are considered the most modern vehicle cables in the automotive and vehicle industry.
For cable construction, single wires with a diameter of max 0.195 mm are used. This makes the cables highly flexible and resistant to cable breakage.
Technical data:
Note:
Cross section is not diameter.
The cross section is a surface dimension.
The diameter is a length measure.
Calculation cross section A from diameter d: d² x π / 4.
Calculation diameter d from cross section A: 2 x √A / π.
π (Pi) ≈ 3.14.
Example for 2.5 mm² cable:
Diameter (conductor) = 2 x √2.5 / π = ≈1.784 mm.
Cross section (conductor) = 1.784² x π / 4 = ≈ 2.5 mm².
Please also note that our AUPROTEC car cables have a reduced wall thickness, i.e. that the PVC insulation is thinner than conventional cables with the same quality.