Feature

●The product is designed using AD8317 chip, and is used for RF signal power detection.
●Can capture energy in -55dBm to 0dBm of an RF signal so that the RF signal is converted into DC output
●The larger the amplitude or the power of the RF signal, the higher the output voltage and the output voltage to the logarithm of the input signal amplitude directly proportionally, thereby expanding the dynamic range of the detected signal that is in the range reac
●It can be used in radio frequency signal detection, signal power measurement, environmental field strength detection.
●It can also be used as part of the automatic gain control and automatic level control.


Description

Features:
The product is developed using AD8317 chip, and is used for RF signal performance detection.
Capable of capturing energy in -55dBm to 0dBm of an RF signal, so that the RF signal is converted into DC output.
The larger the amplitude or power of the
RF signal, the higher the output voltage and the output voltage is,
Directly proportional to the logarithms of the input signal amplitude, which increases the dynamic range of the detected signal, the range is 55 dB.
It can be used in radio frequency signal detection, signal performance measurement, environmental field strength detection.
It can also be used as part of the automatic gain control and automatic level control.
Application: RF transmitter PA set value control and level monitoring; performance monitoring in a wireless transmitter cable; RSSI measurements in base stations, WLAN, WiMAX, and radar.
Specification:
Input impedance: 50 ohms
Output impedance: 50 Ohm (video impedance)
Working frequency freq: 1 MHz ~ 10 GHz.
Output voltage range: 1.6 to 0.4 V (corresponding to -55 ~ 0 dBm)
Input / Output Ratio: 22mv / dBm
Input dynamic range: -60 ~ + 5 dBm (high linear dynamic range: -55 ~ 0 dBm)
Supply voltage: + 3.3 ~ 5 V DC @ 20 mA.
Size: 6.5 x 3.5 cm / 2.6 x 1.4 inches.
Weight: approx. 9 g / 0.3 ounces.
Package contents:
1 x logarithmic power meter.