|
|
|
|
---|---|---|---|
Rose scissors, poultry shearsPlace scissors spread on the table. Place the mini flash in the middle of the blade to be sharpened and move slightly at an angle with a little pressure from the bottom to the top. Then fold the scissors open and close several times to remove the resulting burr. |
Smooth knives without serrated edgePlace the angle of the Miniblitz on a table edge or other surface with edge. Gently press the Miniblitz against the table top with one hand. With the other hand, pull the knife through the V-shaped opening from top to bottom. Pull through several times - without effort. This makes the knife sharp again. |
Lawnmower bladeThe knife does not need to be removed. Please remove power cable from the electric mower or spark plug plug of the petrol mower. Tilt the lawn mower and place the Miniblitz slightly diagonally in the middle of the lawn mower blade and remove the cutting edge several times with pressure. |
AxePlace the axe on a workbench or other stable surface so that the cutting edge of the axe looks upwards. Place mini flash slightly at an angle and remove the cutting edge several times with pressure. Then turn the axe over and repeat the process. |
Small carbide sheets:
On the back of the mini flash there is a release lever below the V-shaped opening. Hold the front cover plate firmly, turn the sharpener over and press the release hook on the back. Now slowly turn the sharpener over and open the top cover plate.
The 2 carbide blades can be rotated from left to right and right to left as well as axially. This makes it possible to use the same carbide sheets 4 times longer. Please ensure that the 2 marker points must be in each position on the top visible side of the carbide sheets.
Then lock the cover plate again.