Feature

●The CSL satfinder allows you to adjust your satellite system precisely and quickly. The microprocessor-controlled device is connected to the F-sockets, between the antenna (LNB) and the receiver. | 303833
●The signal strength is displayed in the LCD display as a bar display with percentage. In addition, the reception strength is output acoustically as a beep. The advantage: when aligning the antenna, you can take your gaze away from the pointer display.
●Side Sensitivity Control Knob This allows you to approach the optimal antenna orientation step by step: first align the antenna roughly using a compass and then work to the best position with the bar indicator and the sound signal.
●Thanks to the 4 LEDs, you can see at a glance which mode your satellite receiver is in. (13V vertical, 18V horizontal and 22KHz / 0KHz).
●Features: high reception sensitivity, easy to use for exact measurement results, easy to read level display, acoustic reproduction of signal strength, with compass, connection cable (coaxial) to LNB included.


Description

Digital satfinder - satellite finder meter - LCD display, integrated compass and sound outputDigital satfinder - satellite finder meter - LCD display, integrated compass and sound output

The satellite finder with full equipment - so you can optimally align your satellite antenna.

With level display and percentage, sound output, side level control for sensitivity adjustment, 4 LEDs to display the satellite level/frequency band, compass and 10 cm connection cable. The satellite finder is switched between the reception electronics of the satellite system (LNB) and the receiver. With the integrated sensitivity control, an optimal adaptation to the signal strength is possible.

Thanks to the bar display, you can precisely adapt to the antenna position with the highest reception power. While aligning the antenna, the beep will help you find the best position.

Product features:

LCD display with blue backlight. Display of the satellite signal strength in percentage and as a bar display. With beep for acoustic perception of the signal level. Attenuator with potential. With compass for satellite search. High reception sensitivity. With polarisation and switching signal display. No own power supply required. Pleasantly easy to use. 10 cm connection cable (coaxial)

Technical data:

Input and output: F connector (75 ohm)Frequency range: 950 ~ 2150 MHz, input level -40 dBm, input level -10 dBm, operating voltage DC 13-18 V

Dimensions (L x W x H): 122 x 67 x 32 mm | Screen size 57 x 17 mm

Connection cable length: approx. 10 cm. Weight: 61 g

Box contents: Satfinder incl. Connection cable and German user manual