Mobile Phone for making wire harnesses or jumpering between headers on PCBs. These premium jumper wires are 6 "(150 mm) Long and come in a strip of 40 (4 pieces of each of ten rainbow colors). They have 0.1 "male header contacts on either end and fit cleanly next to each other on a standard pitch 0.1 (2.54 mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3 "/75 mm, 6/160 mm and 12/300 mm. If you want the female/female type, we have those too.
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the silver latch bit sticking out since that side is a tiny bit wider than 0.1 inches