Overview
Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses CYW43439 wireless chip, which supports Wi-Fi wireless networks in the 2.4GHz band, making it the perfect solution for wireless network control and communication..
Features:
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
Onboard CYW43439 wireless chip, supports 2.4GHz 802.11 b/g/n wireless LAN
264KB of SRAM, and 2MB of on-board flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 x multi-function GPIO pins.
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor.
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
Package contents:
1. Raspberry Pi Pico W with pre-soldered header x1
2. 1 x 3-pin yellow pin header x 1.
3. 1 x USB-A to micro-B cable.
Development Resources
https://www.waveshare.com/wiki/Raspberry_Pi_Pico_W