Feature

●Concentrated structure – The ball head is only 9 cm high, it cuts the space of potential movement to the extreme and allows accurate adaptation to landscape, astro, wild and microphotography.
●Double efficiency – the ball head is equipped with 2 panoramic plates for flexible adjustment on the tripod and a gentle composition in 360 degrees.
●Maximum load capacity 20 kg – this powerful little thing offers enough support for most cameras and lenses on the market
●Smooth operation – the ball head is machined with high-end CNC equipment to ensure the accuracy and interaction of the individual components
●Large contact surface – more contact surface means more wing and adhesion. The numbers speak for themselves: ball 44 mm, quick-release plate 60 x 44 mm, base 58 mm

Description

Ball head tripod ball head tripod ball head panorama tripod head panorama ball head panoramic head.

The most important part between tripod and camera

The pyramid ball head and tripod follow a uniform construction principle: Removes all unnecessary structures and surfaces.

The ball head is only 9 cm high, which not only reduces the space for possible movement, but also allows the camera to be very close to the tripod and fully implements the concept "no centre column".

Photo ball head Arca Swiss tripod head Arca Swiss compatible ball head Arca Swiss compatible

Travel photography camera ball head camera tripod head camera tripod ball joint

The lower panoramic plate.

In addition to the rotation of the camera by 360 degrees, the lower panorama plate plays an important role: When the tripod is set to a very low angle, the angle adjuster blocks the knob of the ball head. In this case, simply loosen the panoramic plate, then the position of the ball head knob can be adjusted.

Practical use of the 2 panoramic plates on the ball head.

The upper panoramic plate

The top panoramic plate is mainly used for panoramic photo shots when the top of the ball head is placed in a horizontal position and the ball part is locked.

Tripod head for heavy lenses tripod head for telephoto lens tripod head natural photography ball head

Maximum load: 20 kg.

Both the pyramid ball head and the tripod are designed for nature photography and have a consistent load capacity: 20 kg, which covers a wide range of cameras and lenses on the market.

Tripod ball head, animal photography, wildlife photography, tripod ball head.

2 vertical grooves and 3-dimensional full coverage

There are 2 vertical grooves on the ball head, which allows you to adjust the camera and lens at any angle.

Large contact surface


Ball Part Diameter: 44 mm. The ball head structure is like a brake pad, the diameter of the ball part corresponds to the contact surface of the adhesion it offers. Especially when the photographer uses a mirrorless remote lens or a long lens without a retaining ring, the weight of one side clearly exceeds that of the other and produces enormous leverage. Therefore, the adhesion of the ball head plays a very important role in maintaining the stability of the lens.	Quick release plate: 60 x 44 mm. The ball head is equipped with a 60 x 44 mm quick release plate, which uses six non-slip mats to give the camera or lens ring maximum adhesion. The quick release plate is also compatible with the ARCA SWISS standard.	Base diameter: 58 mm. We try to maximize the base of the ball so that our ball head can produce enough adhesion on the tripod and does not come loose during the process if the photographer takes the camera apart repeatedly.