Feature
●The isofix universal retrofit is made of high-quality steel, which is not only durable, but also stable.
●This retrofit isofix supports all ISOFIX seats.
●Easy installation, no welding and no drilling.
●ISOFIX Dual Purpose Interface Mount + Universal Car Lock
●Professional production, stable performance, improve travel safety.
Description
1. The Isofix universal retrofit is made of high-quality steel, which is not only durable, but also stable.
2. This retrofit isofix supports all Isofix seats.
3. Easy installation, no welding and no drilling.
4.ISOFIX Dual Purpose Interface Mount + Universal Car Lock
5. Professional production, stable performance, improved travel safety.
Vehicle Installation Requirements:
1. For cars, the original vehicle does not have an ISOFIX interface
2. The back of the car seat can be folded forward
3. There is a gap between the rear of the vehicle and the seat cushion that is not closed
Note: This universal Isofix is suitable for cars with a seat height lower than the boot, close to the boot or a seat height higher than the boot (visually less than 5 cm). The following models cannot install the ISOFIX interface brackets: The boot is closed and the rear seats cannot be folded.
|
|
|
|
|
|---|---|---|---|
|
1. Open the boot and place the Isofix holder in the slot in the seat back |
2. Find the stent interface on the front of the seat and then attach the guide slot hook to the stent |
3. Get the ISOFIX interface of the seat to connect it directly |
4. Bring the locking hook of the seat to the stent locking interface and complete the installation |
