For network connections with a speed of up to 10 Gbit or 10,000 Mbit - well connected in the future!
CAT7 - global standard for up to 10 Gbit
Allows operating frequencies of up to 600 MHz
All of our CAT 7 cables have 4 separately shielded wire pairs within a common shield. The shielding ensures less interference and noise reduction. You also talk about S/FTP (shield, foil twisted pair) and PIMF (pairs in metal foil).
They meet the requirements of IEEE 802.3an and are therefore suitable for 10 Gigabit Ethernet.
Halogen-free, assembled Ethernet cable category 7
Tested up to 600 MHz, possible speeds up to 10 Gbit
Connections: RJ45 plug - RJ45 plug.
Configuration: TIA/EIA 568B.
Shielding construction: Aluminium foil 0.025 mm / 80 x 0.12 mm.
Cable construction: AWG 26/7.
Core material: Copper.
Connector contact surfaces: gold-plated 3µ.
RJ45 with gold contacts.
On both ends there are RJ45 plugs with 3µ gold-plated contact surfaces (pins). This guarantees an extremely high electrical conductivity.
Optimally shielded - S/FTP or PIMF.
FTP or PIMF means that each individual pair of wires is shielded with an aluminium foil. The prefabricated S stands for the additional braided shield that surrounds the wire pairs.
Kink protection on both sides.
The cables have a moulded kink protection on both sides which guarantees the quality of the connection from cable to plug. The length of the cable is also indicated on the connectors.
Latch protection.
In order to protect the locking noses during installation or during the passage through openings, the kink protection grommets have a latch protection that covers them. The latches can still be operated smoothly.