[2.13inch E-paper Display HAT]

[1.54inch E-paper Display Module]

[2.9inch E-paper Display Module]

[2.7inch E-paper Display HAT]

[4.2inch E-paper Display Module]

Overview

This is an E-Ink display HAT V4 Version for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Compatible with Raspberry Pi 4B/3B+/3B/Zero/Zero W/Zero WH.
• SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications:

• Operating voltage: 3.3 V/5 V.
• Interface: SPI
• Outline dimensions: 65 mm x 30.2 mm.
• Display size: 23.71 mm x 48.55 mm.
• Dot pitch: 0.194 × 0.194.
• Resolution: 250 × 122.
• Display colour: black, white.
• Grey level: 2.
• Partial refresh time: 0.3s.
• Full refresh time: 2s.
• Refresh power: 26.4mW (typ.)
• Standby power: <0.017mW.
• Viewing angle: >170°.

Package contents:

1. 1 x 2.13 inch e-paper hat.
2. RPi screws pack (2pcs) x1
3. PH2.0 20 cm 8 pin x 1.

Note:

1. If the color of e-Paper look a little black or grey, please try to change the value of Vcom on demo codes.

2.More resources if you need , please contact us via Amazon message firstly to get .