The peg heads that stand out from the ground around the tent are often painful trip hazards, with the tent screw this does not happen, because with its extremely flat flat plate head, the tent screw can be screwed into place by means of a cordless screwdriver or handle (for bits) off-road flush mounting. No hammering necessary. Pulling is also no problem.
Ideal for camping tents, festivals, awnings, awnings, awnings, tarpaulins, ground anchors and much more.
SPAX - safety, quality and reliability since 1967.
The branded product in the characteristic green packaging - produced in Germany and exported all over the world: Clever minds in Ennepetal are constantly developing new ideas, expanding the product range and establishing the highest quality for home improvement, professional processors, planners and architects all over the world.
12x Flat Head Screws 8 x 220 mm WIROX6x Flat Head Screws 6 x 160 mm WIROX18x Washers 1x Bit T-STAR plus T301x Bit T-STAR plus T40
By hardening the screw, the tent screw can be used even on difficult hard surfaces without any problems.
|
|
|
---|---|---|
For clay soils.Best suited is the 8 x 220 mm version with matching bit T-Star plus T40. The 6 x 160 mm version with matching T-Star plus T30 bit is suitable for a lower load and small eyelets. Everything included in the set. |
For heavily rooted soils.Best suited is the 8 x 220 mm version with matching bit T-Star plus T40. The 6 x 160 mm version with matching T-Star plus T30 bit is suitable for a lower load and small eyelets. Everything included in the set. |
For hard and stony soils.Best suited is the 8 x 220 mm version with matching bit T-Star plus T40. The 6 x 160 mm version with matching T-Star plus T30 bit is suitable for a lower load and small eyelets. Everything included in the set. |
Use and use
To protect the loops and tents, slide the washers (no friction when screwing).
Screw into the ground, protruding the head from the tent and flush with the ground.
Suitable for all anchoring plates. Designed for large and small eyelets.
Thoroughly clean after each use.
Suitable for all tent loops. Designed for large and small eyelets.
Thoroughly clean after each use.
Washers.
Sit at an angle and screw in.
Anchor plates.
Tent loops.
Easy to turn on. | Can be screwed in using a cordless screwdriver or handle (for bits), no hammering necessary. |
Improved hold: | Thanks to the thread, the tent screws have a higher hold than conventional pegs. Also suitable for harder and stony surfaces. Due to the hardening of the screw, it can be used even on difficult surfaces without any problems. |
Incl. Suitable bits: | In order to be able to use the set directly, both a T-Star plus bit T30 and a T40 are included. |
Easy to pull on: | If the screw is expected, it can be tightened without any problems. As a rule, the screw does not have to be reset. |
Quick installation: | Can be screwed in without much effort (both with cordless screwdriver and handle) |
System: | T-Star plus bit in combination with T-Star plus force attack for better power transmission and guidance. |
Assorted: | Designed for large and small eyelets. The plastic disc protects loops and tent panels (no friction when screwing). |