Feature(may vary by option.)

●Package includes: fuse 12 pieces standard 18 x 19 mm (3 A 5 A 7.5 A 10 A 15 A 20 A), fuse holder 4 x 16 cm and 1 x fuse puller.
●Premium Quality The 16AWG wire is made of high quality ABS and copper wire.
●Standard blade fuses up to 20 amps per slot protect the original circuit and provide a cable for new circuits.
●Turns a fuse slot into two slots into a fuse slot, even if a fuse is installed in the slot, this can provide protection for both circuits, the existing circuits are not affected.
●Easy to use: 1. Simply remove an existing fuse from the fuse box and insert this fuse into the bottom slot of the fuse tap. 2. Insert a suitable fuse for the new accessories into the top slot. 3. Crimp your new live cable to the transparent terminal on the fuse tap.

[Micro 4Pcs]




[Mini 4Pcs]




[Mini 5Pcs]




[Small 4Pcs]




[Small 5Pcs]




[Standard 5Pcs]




[Standard 4Pcs]




[Micro 5Pcs]





Description

car fusecar fuse
car fusecar fuse

Package Included:

2 x 3A standard blade fuses, 2 x 5A standard blade fuses, 2 x 7.5A standard blade fuses, 2 x 10A standard blade fuses, 2 x 15A standard blade fuses, 2 x 20A standard blade fuses, 1 x fuse puller, 4 x 16 cm fuse holder with accessories

car fusecar fuse

car fusecar fuse

car fusecar fuse

Easy to identify

Amp values are displayed on the bottom of the fuses, it is helpful for you to select the fuse you need.

Waterproof and dustproof inline fuse holder

These fuse holders can protect car fuses from water or dust and keep them clean and clear.

Compatible blade fuse

Blade fuses can be used for automotive electronics, electrical appliances, most cars, trucks, buses, SUVs, households, boats, motorhomes, ATVs, UTVs, golf carts and other electrical devices.

car fusecar fuse

Purpose:

1. Disconnect power source.2. Check the fuse boxes.3. Find and remove the blown fuse.4. Choose the same size and the same amperage of the fuse to replace it.5. Insert the fuse holder back into the fuse block with the newly added fuse.6. Connect the power source, turn on the ignition to test the new accessories for proper operation.7. If the accessory does not work, turn the fuse holder 180 degrees and insert it back into the fuse block. Try again.