Feature(may vary by option.)
●❣ ❣ ❣ Premium Material The repair kit made of high quality PVC material is strong, waterproof, safe and durable for long service life.
●❣ ❣ ❣ Easy to Use The inflatable boat repair kit is easy to use and you can cut it into smaller sizes to meet your requirements. Easy to carry when getting out of the bus.
●❣ ❣ 4 Colors The repair kit comes with 4 color patch, which can meet your needs.
●❣ ❣ ❣ Enough material: 4 patch packages are enough to repair many things, and you can use them at any time.
●❣ ❣ ❣ Wide application: suitable for repairing inflatable boats, swimming pools, toys, etc.
[16 Pieces & 2 Set]
Description
Adhesive trim repair adhesive patch waterproof repair kit rubber boat inflatable boat repair patch PVC patch repair kit inflatable boat repair patch kit waterproof hole repair kit
Instructions:
1. First, cut a suitable size from the patch according to the damaged part of the product.
2. Draw a mark according to the size of the cut stain in the repaired area, so that the adhesive is not overpainted or applied to other undamaged areas.
3. Coat the cut patch with adhesive. The glue should be applied to the smooth side of the patch. If the product is damaged, glue should also be applied.
4. Wait about 10 minutes or use a hair dryer to blow off the adhesive coated plaster as well as the glued part of the bad product until the adhesive is no longer sticky and slightly dry, and stick the pre-cut plaster directly on it tap at the patch area with a flat object. After pressing with a heavy object for 12 hours, inflate it again and use it. You cannot inflate it immediately.
Specification:
Material: environmental protection PVC.
PVC thickness: 0.7/0.9 mm.
Maximum load capacity: approx. 100 kg.
Patch size: approx. 12 cm x 20 cm / 4.72 x 7.87 inches.
Adhesive: approx. 30 ml.
Patch Color: Random
Packing list:
4 x patches.
2 x 30 ml adhesive.
1 x brush.
1 x packaging barrel.
Note:
1. Please keep the surface clean before applying glue.
2. It is recommended to apply the glue to the thin layer and wait 3 to 5 minutes before applying the glue again.
3. Hot air can be used to accelerate the drying speed of the adhesive and place the heavy objects on the plaster for more than 8 hours.