The ladder is made of 316 stainless steel tubes with a diameter of 1.5 inches.
Steps telescope closed; folds up for easy storage.
Comfortable 2" wide steps.
Handle height: 17 inches.
Ladder length (extended): 41.375"
Total width of ladder: 16.25 inches.
Distance to the first step: 10.5 inches.
Distance between steps: 10 inches.
Number of mounting holes: 7
Hole diameter: 1/4 inch (** mounting material is not included)
How to assemble:
Choose the most suitable side of your rear platform for mounting the ladder.
When installing, find a place where the ladder does not hinder the rotation of the engine, or near the propeller of your boat.
Position the mounting bracket with the ladder in the area to be attached.
Mark the eight mounting holes of the bracket on the deck surface.
Drill the eight marked holes with a suitable drill. NOTE: It is recommended to screw this ladder through for secure installation
Mount the ladder by holding the bracket to the platform and inserting the mounting screws. Attach the ladder with fasteners (not included as installations vary).