[6 mm wooden dowel set]
[6 mm Zentrierspitze | 10 Stück]
[6 mm drill depth stop x 8 pieces]
Our dowel contains 10 pieces 6 mm, quantity to cover all your work requirements. Functions: For positioning two wood connection holes to perfectly connect two wooden blocks, applied to the exact alignment of drill holes in dowel carpentry.Material: Stainless steel has good corrosion resistance and heat resistance, so it is robust and durable and can be used repeatedly. Positioning drill for woodworking can be used to install wardrobes, cabinets, tables, beds, bookshelves or DIY wood crafts. It is very suitable for people or amateurs engaged in woodworking work.
|
|
|
|
---|---|---|---|
Choose the appropriate drill, dowel pin, stop ring and dowel wood size. Note: The size of the stop ring, drill, dowel and dowel wood should be the same. |
Install the deep stop rings on the drill to a depth greater than half the total length of the dowel wood |
Drill holes in the plank with an electric drill and insert dowels |
Align the other plank connection with the drill hole and then tap the other board with a hammer. The other plank leaves a mark |
|
|
|
|
---|---|---|---|
The point in the middle of the pen marks exactly where the hole on the other board will be. |
Use the tool to remove the alignment pins. Then drill holes in the marked round head with a drill |
The holes for both boards are drilled. Insert the dowel wood into the hole |
After inserting the dowel wood, the two boards are successfully connected |
|
|
|
|
---|---|---|---|
Material: Stainless steel, stainless steel has good corrosion resistance and heat resistance, so it is robust and durable and can be used repeatedly. |
The dowel pin centring tip set contains 10 pieces 6 mm. The essential sizes that meet daily needs ensure different installations of furniture or artist objects. Note: Due to manual measurement, the appearance of the product may vary by 1-2 mm |
Positioning drill bits for woodworking can be used to install wardrobes, cabinets, tables, beds, bookshelves or DIY wood crafts. It is very suitable for people or amateurs engaged in woodworking work. |
When installing, the selected tool size should be uniform |
Specification:
Material: Stainless steel
Size:
Height: approx. 8mm
Dimensions: 6mm
Box contents: 10 x dowel centring tip
- Stainless steel material is strong and durable, you can use it safely.
- The centring tools are not for hard surfaces, they are mainly used for woodworking.
Please note:
Please allow 1-2 mm error due to manual measurement
The item colour shown in the photos may look slightly different on the computer calibration of the monitor as monitors are not identical