[21 watts]
[5 watts]
By LED fog lights or LED retrofit lamps.
Osram LEDriving Canbus control unit:
LED bulbs not only bring an excellent look to your vehicle, they are also very energy efficient. However, due to the low wattage, some on-board computers produce warning messages. The Canbus Control Unit prevents these warning messages without compromising the quality of the LEDs. Simply clamp the warning canceller between the lamp and base and enjoy all the benefits of modern LED lighting for your vehicle, such as Osram LED retrofis or LEDriving FOG fog lights.
Please note: This Canbus is not suitable for use with the Night Breaker H7 LED In combination with the H7 LED, an Osram Smart Canbus is needed, which is available depending on the vehicle in the variants LEDSC01, LEDSC02 and LEDSC03. In this case, please check which Canbus is necessary for your vehicle before purchasing. Under osram.de/ledcheck you will find the current vehicle list for the use of the Night Breaker H7 LED. If you have any questions, please contact automotive-service[a]osram.com.
Bypass the vehicle failure detection system to avoid error messages in the on-board computer when using a retrofit LED lamp with smaller wattages. No negative effect on the light output and heat management of the LED solution.
Version: 5 Watt | LEDCBCTRL101
Bypass the vehicle failure detection system to avoid error messages in the on-board computer when using a retrofit LED lamp with smaller wattages. No negative effect on the light output and heat management of the LED solution.
Version: 21 Watt | LEDCBCTRL102
Bypass the vehicle failure detection system to avoid error messages in the on-board computer when using LED fog lights with smaller wattages. No negative effect on the light output and heat management of the LED solution.
Version: 50 Watt | LEDCBCTRL103