Feature

●Stainless steel grinder: this grain mill is made of materials that last a lifetime. Cold rolled steel for the rollers and aluminium for bodywork and stainless steel funnels as well as oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other grains.
●QUALITY IMPROVEMENT: It is equipped with adjustable 2 rollers, which can crush the grain well and peel off the shell perfectly to be good for brewing beer in the future. The 2-roller design has the main advantage of pulling the grain better and providing improved throughput.
●EFFICIENT This equipment is perfect for large batches and highly efficient milling. With two rollers, your entire grain is crushed twice in one cycle. The squeezing is done by the fixed gap between the two upper rollers. The first pass slightly smooths the grain and prepares it for the next crush that breaks the grains and releases the starch with minimal shell damage.
●Large capacity: the funnel can hold up to 30 kg of grain, and the roller body has an aluminium block frame that houses three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integrated into the roller, allowing clockwise or counterclockwise drive.
●Easy to use: a hand crank is included, but the mill can be easily motorised with a corded electric drill. You dont need any additional attachments, just stick the drill on and off you go. Rustproof knurled knobs allow an adjustment range for the gap spacing of .070".


Description

Condition: New and good quality

Colour: silver.

Type: Grain Crusher

2 wheels: stainless steel.

Grinding housing: aluminium.

Funnel: stainless steel.

Speed: 8 lbs/min (3.6 kg/min).

Total height: 260 mm (10.2 inches).

Funnel dimensions at top: 220 x 210 mm (8.7 x 8.3 inches).

Footprint size of the sander: 140 x 80 mm (9.4 x 3.1 inches).

Roll dimensions: 76 x 150 x 50 mm (3 x 6 x 2 inches).

Single roller: diameter 38 x 150 mm (1.5 x 6 inches).

The ribbed rollers are adjustable at both ends of the slot.

Roll adjustable approx. 0.1.2.5 mm.

With 2 aluminium poles.

Crank handle: 120 mm (4.7 inches).

2 roller malt mill, grain mill, home brew mill, barley crusher homebrew

Features:

Width and roller diameter are optimized for use with drill

Adjustable rollers at both ends for even shredding

12 TPI knurling to efficiently pull grain through rolls while keeping the hull intact to form an excellent filter bed for saving

6 inch long adjustable gap.

Fully adjustable grinder.

0.060" fixed primary gap, 0-0.065" fully adjustable secondary gap.

Double stainless steel eccentric adjusters for no jamming.

8 lbs per minute is average throughput.

6" x 1.5" wheels made of stainless steel with diameter

Crankshaft can be rotated clockwise or counterclockwise

Sturdy aluminium frame.

SAE 841 Oil Impregnated Bronze Bushings

Heavy duty two-rolling mill with adjustable secondary gap spacing.

Integrated drive shaft and axles

The mill can be hand-cranked or motorised with a cordless punch

You need to supply or build a base

Note:

You will need to supply or build a base to place the mill over a grain container or 5 gallon bucket.

Package includes:

2 aluminium poles.

1. Malt mill.

1 x funnel.

1 x crank handle.

Some accessories