80 grain size fin grinder adopts columnar design, which is made of emery and resin glue, the sand grains are uniform and full, the grinding is sharp, the strength is high and it has good wear resistance.
It is widely used in polishing, wire drawing and finishing metal surfaces.
It can be installed in high-performance electric mill, windmill, electric drill, wind drill, bench drill and other operations,
Remove burrs from metal or other materials, polish rough surfaces.
8 different diameters of fin grinders.
A variety of specifications to meet your different needs.
How to use:
Soak in hot water at 60°C for 5 minutes before use.
Allow the grinding wheel to absorb sufficient water,
It will reduce a lot of dust when used,
The emery cloth will not break. This increases the life of the grinding wheel,
Reduce your total cost of ownership.
Specification:
Abrasive: aluminium oxide.
Grit: 80 grit.
Shape: cylindrical + cone.
Package includes:
Cylindrical blower grinder 16 pieces:
Diameter 80 mm x 25 mm x 6 mm, 2 pieces.
Diameter 60 mm x 25 mm x 6 mm, 2 pieces.
Diameter 50 mm x 25 mm x 6 mm, 2 pieces.
Diameter 40 mm x 25 mm x 6 mm, 2 pieces.
Diameter 30 mm x 25 mm x 6 mm, 2 pieces.
Diameter 25 mm x 25 mm x 6 mm, 2 pieces.
Diameter 20 mm x 25 mm x 6 mm, 2 pieces.
Diameter 16 mm x 25 mm x 6 mm, 2 pieces.
4 pieces conical sanding disc made of sandpaper:
Diameter 25 mm x 45 mm x 6 mm, 2 pieces.
Diameter 20 mm x 45 mm x 6 mm, 2 pieces