Descriptions:
This corundum whetstone has high hardness, toughness and good stability. Suitable for grinding metal materials with medium and high tensile strength.
It is widely used for coarse grinding of ordinary steel such as low hardness carbon steel, general alloy steel, malleable iron, hard bronze, cutting tools, workpieces, etc. Also for mould grinding.
Can be installed on power tools such as sanders, sanders for deburring, flat grinding, time saving.
Available in 2 shapes and multiple sizes. Normal quality grinding head, the size may shrink, please choose according to actual needs.
Tips:
The new corundum grinding head should be tried at low speed before use. If there is a jumping problem, do not use it further.
Please press gently and avoid shocks. The corundum grinder is used for grinding workpieces. If the force is too high, the abrasive powder is difficult to remove.
Flying chips may occur during use. When using this corundum grinder, please use a device, a non-slip fingerling and wear protective glasses.
Specifications:
Material: brown fine corundum (aluminium oxide).
Shape: cylindrical
Granularity: 80 grit
Shaft surface: nickel-plated.
Shaft material: carbon steel.
Shank diameter: 6 mm/1/4 inches.
Head diameter: 20 mm/0.8 inches.
Total length: 52 mm/2.05 inches.
Required line speed: higher than 10-20 m/s.
Package: 15 pieces with mounted grinding tips stone heads