Feature

●Size: 695ZZ (inner diameter = 5 mm, outer diameter = 13 mm, thickness = 4 mm)
●Umbrellas on both sides of the bearing to keep dust away. Suitable for high speed operation
●It is made of carbon steel, durability and resistance to deformation under heavy loads
●ABEC Tolerance 1 (P0), Z1 Noise Level for General Use
●Pre-lubricated, easy to maintain


Description

Description:

Deep groove ball bearings are one of the most widely used rolling bearings. They are used to absorb radial and axial loads in both directions.

Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

With low friction and high speed, deep groove ball bearings are cost-effective and low maintenance.

Carbon steel bearings have better toughness than chrome steel bearings after quenching. These low cost bearings are commonly used in areas with low requirements for Mohs hardness.

Single row, pre-lubricated, normal accuracy.


Selection guide:


Shields (designation Suffix Z / ZZ) - High speed. Protect from dirt and debris.

Sealed (designation Suffix RS / 2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil and liquid resistant). Lower limit speed as shield bearing.


Specification:


Model: 695Z.

Sign Type: Double Shield

Material: carbon steel.

Heat treatment: quenching

Hardness: HRC50-55.

Cage material: stamping steel.

Inner diameter (d): 5 mm.

Outer diameter (D): 13 mm.

Thickness (B): 4 mm.

Accuracy class: P0 (ABEC-1).

Noise level: Z1.

Number of packs: 20

Weight: 52 g