The compression cutters are designed with both top and bottom cut grooves. The upper part of the cutting length closest to the shaft has a left spiral that forces chips down.
When using the compression bit, you need to make sure that the first pass is under the cut-out part of the bit, or you will get results similar to only cutting with a cut-out bit; dip into the material with a ramp, over a distance instead of all at once, and a guide that is outside the Designs begin. to achieve the depth of passport, it is ensured that the entire piece is perfectly clean at the top and bottom. Compression bits are designed to cut in a single pass, but if your machine cant handle this depth of cut, you can cut in multiple passes as long as that first pass is under the cut-out part of the piece.
|
|
|
---|---|---|
INDUSTRIAL QUALITYMade of high-quality solid carbide fast and sharp carving, plastic bearing with size information |
Suitable material:For carving/cutting/engraving/milling/sloting/image cutting in materials such as MDF, ABS, PVC, PCB, SMT, CNC, acrylic, nylon, resin, plastics, sealing board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface finishing, 3D relief sculptures etc. |
Specification:Flute: two, suitable for portable hand router, suitable for portable table router, suitable for small CNC milling machine |
Up down compression cutter, double-edged | Up down compression cutter, double-edged | Up down compression cutter, double-edged | Up down compression cutter, double-edged | Up down compression cutter, double-edged | Up down compression cutter, double-edged | |
---|---|---|---|---|---|---|
Shank diameter | 3.175 mm | 3.175 mm | 4 mm | 6 mm | 6 mm | 6 mm |
Cutting diameter | 3.175 mm | 3.175 mm | 4 mm | 6 mm | 6 mm | 6 mm |
Cutting length | 17 mm | 22 mm | 22 mm | 22 mm | 25 mm | 32 mm |
Total length: | 38 mm | 45 mm | 45 mm | 50 mm | 50 mm | 60 mm |