Feature

●Size: 605Z (inner diameter = 5 mm, outer diameter = 14 mm, thickness = 5 mm)
●Umbrellas on both sides of the bearing to keep dust away. Suitable for high speed operation
●It is made of carbon steel, durability and resistance to deformation under heavy loads
●ABEC tolerance 1 (P0) for the most common use
●Such as 605ZZ / 605-2Z / 80015. Pre-lubricated, easy to maintain


Description

Note:
Please refer to the picture and select the correct bearing type before ordering (sealed or shielded on both or one side of the warehouse). Suffixes on the bearing only to distinguish between sealed and shielded bearing types. It would not affect the use of our product. Description:Deep groove ball bearings are one of the most commonly used rolling bearings. They are used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment, etc. These cost-effective bearings are often used in areas with low Mohs hardness requirements. Single row, pre-lubricated, normal accuracy.
Selection guide:
Shields (designation additive Z/ZZ) - High speed. Protect against dirt and deposits. Sealed (suffix RS/2RS) - Made of sheet steel reinforced NBR (oil and liquid resistant). Lower limit speed than Shield Bearings.
Specification:
Model: 605ZZ
Sign type: double shield.
Material: carbon steel.
Heat treatment: quenching
Hardness: HRC50-55.
Cage material: stamped steel
Inner diameter (d): 5 mm.
Outer diameter (D): 14 mm.
Thickness (B): 5 mm.
Dynamic load rating (Cr): 1.3 kN
Static Load Capacity (Cor): 0.49 kN
Accuracy class: P0 (ABEC-1).
Noise level: Z1.
Package quantity: 20 pieces.
Weight: 74 g