Feature

●Twist Drill: Shank Diameter: 3.175mm/1/8"; Cutting Diameter: 2mm/0.079"; Cutting Length: 22mm/0.866"; Total Length: 45mm/1-7/9". Used for most standard milling applications.
●Wide applications: suitable for engraving, cutting, carving, milling, slotting, sculpture in MDF, ABS, PVC, acrylic, nylon, plastic, wood, plywood, hardwood, etc.Good for surface processing, 2D or 3D relief formation.
●Spiral and sharp flutes: spiral chip space design for fast and clean chip removal. Sharp cutting edge ensures even cutting and no interference.
●Carbide Materials Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cut resistance and drilling effect to improve efficiency.
●FREECUT DESIGN Brush cutters can direct the chips up and away from the milling area, creating an unobstructed path that prevents tool breakage and extends tool life.


Description

Specification:



Shaft diameter: 3.175 mm / 1/8 inch.



Cutting diameter: 2 mm / 0.079 inches.


Cutting edge length: 22 mm / 0.866 inches.

Total length: 45 mm / 1-7/9 inches.

Material: solid carbide (tungsten steel).

Number of flutes: single flute

Box contents: 1 piece. x Spiral Router Bit


Description:

Suitable for engraving, cutting, carving, milling, slotting, sculpture in MDF, ABS, PVC, acrylic, nylon, plastic, wood, plywood, hardwood, etc.Good for surface processing, 2D or 3D relief sculpting.

Spiral chip space design for fast and clean chip removal. Sharp cutting edge ensures smooth cut and no interference.

Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cut resistance and drilling effect to improve efficiency.

Vertical router bits can direct chips up and away from the milling area, giving an unhindered path to prevent tool breakage and extends the life of the tool.