Feature

●6701-2RS (inner diameter = 12 mm, outer diameter = 18 mm, thickness = 4 mm)
●The 6701 2RS bearings are shielded on both sides to keep the lubricant in the bearing
●Made of chrome steel (GCr15), durability and resistance to deformation under high loads
●ABEC tolerance 1 (P0), Z2 noise level for most general purpose applications
●Static load capacity of 532 N and dynamic load capacity of 928 N


Description

Note:
Please refer to the picture and choose the correct bearing type before placing your order (sealed or shielding on both or single side of the warehouse). The suffix on the bearing is only used to distinguish between sealed and shielded bearing type. This would not affect the use of our product.


Description:


Single row, pre-lubricated, normal accuracy.

Deep groove ball bearings are one of the most commonly used rolling bearings. They are used to absorb radial and axial loads in both directions.

Ball bearings are cost-effective and low maintenance due to low friction and high limit speed.

Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment and so on.


Selection guide:


shields
(Designation suffix Z / ZZ) - Fast speed. Protect from dirt and debris.

Sealed housing (designation suffix RS / 2RS) - made of nitrile butadiene rubber sheet steel (oil and liquid resistant). Lower limit speed as shield bearing.

Technical data:

Model: 6701-2RS.
Seal type: double sealed inner ring/outer ring material: chrome steel (GCr15).
Cage material: stamped steel
Inner diameter (d): 12 mm.
Outer diameter (D): 18 mm.
Thickness (B): 4 mm.
Dynamic load capacity (Cr): 928N.
Static load rating (Cor): 532N
Accuracy class: P0 (ABEC-1).
Noise level: Z2.
Number of packs: 5 pieces