Feature

●6810-2RS (inner diameter = 50 mm, outer diameter = 65 mm, thickness = 7 mm)
●The bearings of the 6810-2rs are sealed on both sides to keep the lubricant in the bearing
●Made of chrome steel (GCr15), durability and resistance to deformation under high loads
●ABEC tolerance 1 (P0), Z2 noise level for most general purpose applications
●Static load capacity of 5760 N and dynamic load capacity of 6170 N


Description

Note:
Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on both or single side of the warehouse). The suffix on the bearing is only used to distinguish between sealed and shielded bearing type. This would not affect the use of our product.
Description:

Single row, pre-lubricated, normal accuracy.

Deep groove ball bearings are one of the most commonly used rolling bearings. They are used to absorb radial and axial loads in both directions.

With low friction and high limit speed, ball bearings are cost-effective and low maintenance.

These low cost bearings are commonly used in areas with low hardness requirements.

Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment, etc.

- Selection guide:
- Shields
(Designation suffix Z / ZZ) - High speed. Protect from dirt and debris.
Sealed housing (designation suffix RS / 2RS) - Made of sheet steel reinforced rubber (oil and liquid resistant). Lower limit speed as shield bearing.
Specification:
Model: 6810-2RS Seal type: double sealed inner ring/outer ring material: chrome steel (GCr15) Cage material: stamped steel Inner diameter (d): 50 mm Outer diameter (D): 65 mm Thickness (B): 7 mm Dynamic load (Cr): 6170 N Static load rating (Cor): 5760N Accuracy class: P0 (ABEC- 1) Noise level 1) Noise : Z2 Number of packs: 2 pieces