Feature
●Size: the compression cut spiral groove cutter has a shaft diameter of 4 mm, a cutting diameter of 4 mm, a cutting length of 25 mm and a total length of 50 mm. The spiral cutter allows precise and efficient cutting results.
●High-quality carbide: the end mill is made of high-quality carbide, which ensures a long service life and excellent cutting properties. Compared to ordinary HSS (high-speed steel), carbide has better durability and heat resistance.
●Double-edged spiral design: the groove cutter has two sharp cutting edges. The double helix design end mill allows efficient chip removal and reduces vibration during operation to achieve a smoother and more precise cut.
●Excellent performance: the wood end mill achieves clean, professional results. The "compression cut" groove cutter creates a clean top and bottom.
●Compatibility: the spiral groove cutter is suitable for processing plywood, MDF, chipboard as well as soft and hardwood and other materials. The wood slotted hole cutter can be used in CNC machines, hand routers, milling tables and other machines and can be easily integrated into existing facilities.
Description
Suitable material:
Plywood, laminates, MDF, and other composite materials
Compression router bit
The compression cutters are equipped with both up and down cutting grooves. The upper part of the cutting length closest to the shaft has a left-hand spiral that pushes the chips down. The lower part of the cutting length closest to the end has a right-hand spiral that pushes the chips upwards. When cutting, the opposite tension directions generate opposite up and down forces. The opposite cutting forces stabilise the material removal, which compacts the composite layers and thus counteracts delamination on the top and bottom of a workpiece.
Since compression cutters do not pull up or push down a workpiece, they leave an excellent finish on layered composite materials and lightweight materials such as plywood. The fact that plunge cutters are especially suitable for profiling, as the advantages of the up and down cut geometry are not used when grooving or grooving.
|
|
|
|
|
|
|---|---|---|---|---|---|
| SP2FC-D4-L25 | SP2FC-D6-L22 | SP2FC-D6-L32 | SP2FC-D8-L32 | SP2FC-D8-L45 | |
| Customer Reviews |
44
|
103
|
91
|
173
|
79
|
| Price | USD 13.04 | USD 17.40 | USD 20.66 | USD 28.27 | USD 31.54 |
| Cutting diameter: | 4 mm | 6 mm | 6 mm | 8 mm | 8 mm |
| Shaft diameter: | 4 mm | 6 mm | 6 mm | 8 mm | 8 mm |
| Cutting length: | 25 mm | 22 mm | 32 mm | 32 mm | 45 mm |
| Cutting length: | 50 mm | 50 mm | 75 mm | 75 mm | 100 mm |
