[Blue]
[Yellow]
Feature:
Cleaning soldering residue: the soldering iron tip must be heated before each start of soldering so that the surface of the solder on the iron tip has an oxide layer. In addition, residues such as rosin or vaseline flux also become dirt that sticks to the surface of the soldering tip. If they are not removed in time, the tip is covered with tin slags and oxides, which affects the adhesion of tin, reducing the quality of soldering, solder joints also contain impurities, etc.
High temperature resistance: the material of the soldering iron sponge determines the properties of good water absorption and high temperature resistance. This high temperature resistant sponge has dense holes on the surface, and after full soaking, the soaking factor is high, the thickness increases significantly to 8mm-10mm, which can quickly absorb the heat on the soldering iron tip, avoiding damage to the soldering iron tip at high temperatures.
How to use: first let the cleaning sponge absorb enough water, then squeeze out the excess water, hold seventy percent of the water, wipe the already heated soldering iron tip on the cleaning sponge a few times, and when you see the soldering iron tip reveals its luster, you can continue soldering. It is important to note that you should not use a dry soldering iron sponge directly to avoid static electricity or damage to the soldering iron tip.
Specification:
Colour: blue/yellow.
Size: 55mm x 55mm
Fabrics:High temperature resistant sponge
Package includes:
10 x High Temperature Soldering Iron Special Sponges