Feature(may vary by option.)
●Low pressure mixer taps are intended for connection to a boiler, under-sink unit or pressureless storage and have 3 connections
●The spout rotates 360 degrees to allow unobstructed access to the sink. This makes the single-lever mixer tap perfect for single or double sinks. And the high spout provides more space to work and better access to all areas of the sink
●High quality metal construction of the faucet body and handles ensures reliability. Brushed nickel - surfaces are guaranteed to be corrosion and tarnish resistant
●The Neoperl aerator fuses the air completely with water, makes the water softer and reduces water flow noise. The ceramic cartridge has been tested 500,000 times, no dripping and long-term use
●Standard 3/8 inch connection, all parts for mounting included, very easy to install. Warranty time: 5 years. If you have any questions about our sink taps, please feel free to contact us
[Low Pressure Kitchen Faucet]
[Low Pressure Fitting]
[High Pressure 1]
[High Pressure 2]
Description
Why choose this kitchen tap?
|
|
|
|
|
|---|---|---|---|
|
The fitting for your sink is made of robust stainless steel brushed nickel surface to prevent scratches, easy to care for and event. |
Replaceable 35 cm cartridge. Test 500,000 times, long service life. Single lever design for quick and easy control of flow and temperature. |
No noise, no splashing water. You can turn the aerator directly counter-clockwise by hand, without tools to clean the aerator. |
Standard 3/8 inch connection, 50 cm long, DVGW-certified PEX material inner tube, braided 304 stainless steel outer tube, corrosion resistant and explosion-proof hoses are chemically and microbiologically tested. |
Further details you want to know
Technical details:
- Number of holes: Single hole
- Fitting type: Single-lever mixer tap
- Connection type: Low pressure
- Hot and cold controls: Yes
- Valve type: 35 mm ceramic cartridge
- Applicable mounting hole: diameter 32 - 45 mm.
- Recommended water pressure: 0.5 - 5 bar
Warning: !
Is the low pressure fitting in a short time (within 15 seconds), is it normal?
If the low pressure tap drips for a short time, it is normal. This is a simple physical reason!
The heating of the under-sink storage creates water vapour that must escape through the fitting. This can, depending on the type of memory, heating phase and power pressure, take a few times.
Because the tap would stop too quickly after you run in, the boiler would break faster.
|
|
|
|
|---|---|---|
|
|
|
|
